Suresh Electrical Industries
Suresh Electrical Industries

Home » Products » Electroplating Rectifiers

Electroplating Rectifiers

Providing you the best range of Electroplating Rectifiers such as Industrial Electroplating Rectifier, Electroplating Rectifier Set and Plating Rectifier with effective & timely delivery.

Industrial Electroplating Rectifier

We offer optimum quality Industrial Electoplating Rectifier to our precious client. We do not compromise in terms of quality and so we use high grade raw material for the manufacturing of these items. We also make sure that our range is in compliance with the industrial standards. The product is analyzed at different levels, to ensure complete satisfaction before the final dispatch of the product.



  • Input voltage between 380-440 Volts

  • Output voltage is usually fixed rated maximum DC

  • Output current is rated maximum direct current (DC)

  • Temperature rise is less than 45° C above ambient

  • Efficiency depends on the voltage rating of rectifier


Starting Circuitry:

Rectifiers are designed for 2-3 phase and are available for operations within a wide range of voltage fluctuations. They are preferable to connect the input to the rectifier through a proper protective device, to provide positive protection to personal and the system, at the time of maintenance or in case a fault occurs.

DC Output Control:

The function of the variable output controls is to control the voltage or current or its operating range by varying input voltage to the main transformer primary. The DC output voltage variation is achieved steplessly 0-100% by means of an on load roller type power's make voltage regulator.


  • Galvanizing

  • Copper plating

  • Chrome plating

  • Tin plating

  • Precious metal coating


Types Electroplating Rectifiers:

  • DC Rectifier

  • Silicon Rectifier

  • Bridge Rectifier

  • Transformer Rectifiers

  • Bridge Rectifier

  • DC Rectifier

  • Silicon Rectifier

  • Transformer Rectifier


  • Space efficient and compact design

  • Power saver

  • Don't require much maintenance

  • Efficient performance

  • Long lasting

Industrial Electroplating Rectifier

Electroplating Rectifier Set

We bring Electroplating Rectifier Set that provide low voltage high current DC power supplies and mostly work on 3 phase AC input. These possess a capacity of up to 10, 000 Amps and an output ranges from zero to any value up to 400 V D.C. The input is about 415 V 3 phase 50 Hz AC.


  • Output Type - AC Three Phase
  • Used – Electro-Chemical
  • Excitation - Three Phase, Brushless Self-Excited

Electroplating Rectifier Set

Plating Rectifier

We manufacture state of the art technology Plating Rectifier used for plating, anodising & hydrogenation applications. The rectifier consists of three parts. We always use IPT transformers in our rectifiers, which further reduces the losses of the system while any other manufacturer is not using the same.


  • Double wound transformer
  • Linear rolling contacts type regulators
  • Silicon diode cubicle
  • Superior features of our dc rectifiers
  • It will be designed such that it will take up/absorb the spike/surges produced in the system, which no other manufacturer is giving. The spike which being of very high voltage persists for milisec if passed on to the system, will result into damage/burnt of all the electrical/electronic devices connected with it results in heavy loss
  • Our rectifier will be suitable for 100% load for continuous duty cycle and recommended to put 10% over load also
  • The efficiency of our transformer used in the rectifier will be more than 95%
  • The ripple contents of our rectifier will not be more than 5% of the value while in other manufacturers case, the ripple contents are always higher even more than 10% by which the output dc voltage will not be pure and will not perform efficiently
  • We design our rectifiers in such a way that their temperature rise should not increase above 25-27 degree centigrade above ambient at 100% load results in higher efficiency and lesser losses while in others case, they design their rectifier with 45 degree centigrade temp. Rise above ambient


  • Input voltage: Three phase AC380V±15%   50HZ
  • Dimensions: 12.7*29
  • Peak Repetitive Reverse Voltage: 1600
  • Output Voltage: 12 V

Plating Rectifier

Contact Us
Suresh Electrical Industries
Mr. Suresh Wani / Ms. Shilpa Shah (Technical Partner)
No. 9, Patel Industrial Estate, S. V. Road, Dahisar East
Mumbai - 400068, Maharashtra, India

Contact via E-mail

Home  |  About Us  |  Products  |   Trade Offers (10)  |  Site Map  |  Contact Us   |   Mobile Site

Member © Suresh Electrical Industries. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited